Enzoic for Active Directory
Download the Installer
The installer is available as both an MSI and an EXE. The EXE version will install the necessary version of the .NET Framework if it is not already available on your server, while the MSI will not. If in doubt, you should use the EXE installer.
Links to download the most current version (Domain Controllers must all run the same version):
https://cdn.enzoic.com/files/EnzoicForAD_3.0.378.0.exe (MD5: 7199edd48b27b18b093e8fa532effc78)
https://cdn.enzoic.com/files/EnzoicForAD_3.0.378.0.msi (MD5: 61b29101a9fa2edafe16d972520673cc)
https://cdn.enzoic.com/files/EnzoicForADClient_3.0.378.0.msi (MD5: 41112b102564bb359f85c1aabb883b66)
Read the current release notes.
Multiple Domain Controllers
Enzoic for Active Directory needs to be installed on every writable domain controller in the target domain - it is not necessary to install it on read only domain controllers. Note that Enzoic for Active Directory stores its configuration settings in Active Directory, so once it is configured on one domain controller, the configuration settings will replicate to all the domain controllers in the domain.
Ensure Enzoic Port is Available
Enzoic for Active Directory uses a local port for communications between its processes. The default port is 6164. If this port is being used by other software on the system, unexpected behaviors may result. If necessary, the port can be changed using the following registry setting after install:
Registry Key: "HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\Enzoic\Enzoic for Active Directory" Value Name: ServicePort Value Type: DWORD Value: (new port to use)
Setup Wizard Installation
Run the installer, and then reboot the domain controller when prompted. Future upgrades will not generally require a reboot, but the initial install does.
Enzoic for Active Directory needs to run on each domain controller; however, it only needs to be configured once. All configuration settings (with the exception of the optional proxy server settings) are stored in Active Directory and automatically shared with all instances of that domain.
After the initial reboot, the Setup Wizard will walk you through the configuration process with the following steps. All settings can be modified through the console after initial set-up: